How To Identify A Poor Gutter System Design

The roof is to a house what shoes are to a man. Well, it is the first thing people notice when they look at a house. It therefore goes without saying that a roof should always be aesthetically appealing. But over and beyond that, the roof should at all times be functional. That is where gutters come in. A well designed roof should always have a good gutter system. Unfortunately, there aren’t so many expert gutter repair contractors specializing in eavestrough in Mississauga. This does not mean though that the good ones are non-existent. They are there, you just have to look for them in the right places. But before then, just how do you know you have a poor gutter system? Read on to find out.

Frequent Clogs

9646301667_f7a0014667

Clogs are inevitable especially in homes with traditional gutter systems. This becomes worse when the configuration comes without a trough cover. Frequent clogs cause water to overflow leading to problems with on the foundation. When you reach a point where you always experience frequent clogs, you might consider changing the design of your gutter.

Cracks In The Foundation

When the foundation of your home is exposed to water, serious issues begin showing. Most of the times, these issues will begin with formation of cracks either on the exterior or interior of your foundation. When you come across any cracks on the foundation, it is an indication that the water from your gutter is being let down into the basement.

Dirt Erosion near Downspouts

A well-designed gutter will effectively allow water to flow away from your home naturally. However, a poor design that is angled too close to your home may lead to formation of a pit under your downspout. When this happens, gutter extension can be used to correct the problem.

Dry Spots under Downspouts

Most homeowners do not give much attention to the roof gutters around their houses until the gutters start clogging or overflowing. While these may seem to be very serious issues, minor things like dryness at the end of the gutter system may also be an indication of problems with your gutter system. This happens mostly when the water is escaping through other areas for example a hole.

Interior Leaks

If you notice streams of water that seem to be pouring down from the middle of your gutters, it’s likely that your gutters has a leak. Sometimes it is very hard to notice the water that may be dripping down the sides of your home. Fortunately, there will be stains or even growth of mold to remind you of the teething gutter problem.

Overflowing Gutters

Clogging stands out as one of the main reasons why gutters overflow. However, if you have recently replaced your gutters but still notice this problem, it may be due to a poor gutter design. You can have a professional check the size of your gutters to ensure that they are the right size. Your gutter design should also be inclined appropriately for ideal flow of water.

Peeling Exterior Paint

Water always leaves behind stains anytime you have a faulty gutter. You will notice the stains on the sides of your home which will eventually cause peeling paint. This is more often than not, a result of incorrect gutter size or wrong placement.

Puddles or Ice near Foundation

Be keen on what you see on your home’s foundation. Water erosion anywhere near the foundation is always a sign that your gutters allow moisture to escape through downspouts. This should not be the case at all. Moisture should instead, flow through the downspouts.

Bottom Line

Gutters have a profound and imperative effect on the lifespan of any roof. A good gutter system will save you lots of cash that would have otherwise been used in repairs. That’s why it is always a good idea to hire the best gutter repair and installation contractors you can find in your local area.